Pool Plaster Disc 50 Grit Dry Use Non-Corrosive- DRP Tools
Pool Plaster Disc 70 Grit (Non - Corrosive) - DRP Tools
Pool Plaster Disc – 70 Grit (Dry Use, Non - Corrosive) - DRP Tools

Pool Plaster Disc – 50 Grit (Dry Use, Non-Corrosive)

Matrix Abrasive SKU: WD7050

$59.00 $89.00 Save $30

  • Dry Use Recommended — quick setup with any 7″ polisher (wet use may extend life but requires a water-fed tool)
  • Aggressive 50 Grit — fast removal of heavy scale & coarse plaster
  • Non-Corrosive Matrix — won’t rust; safe for salt-water pools
  • Surface Types: Marble, quartz (Diamond Brite), pebble (PebbleSheen), Hydrazzo®, Durazzo®
  • Max Speed: 3,500 RPM with variable-speed polisher/sander

Not sure which grit is right? See the Pool Plaster Disc Grit Guide. To view all discs & accessories, visit the Pool Plaster Disc Collection.

Specifications

Disc Diameter 7″ (hook & loop)
Backer Pad 7″ Hook & Loop Backer (AG7529)
Grit 50 (coarse cut)
Use Dry recommended (wet requires water-fed tool)
Max RPM 3,500
Surface Types Marble, quartz, pebble

How to Use

  • Work in ~5 ft × 5 ft sections, keeping the pad flat
  • Vacuum or rinse between passes to manage heat & dust
  • Do not exceed 3,500 RPM
  • Always use with 7″ hook & loop backer (AG7529) for even wear

Recommended Process

  1. 50 Grit — remove heavy scale / roughness (this product)
  2. 70 Grit — blend & refine scratch pattern
  3. 120 Grit — final smoothing; swim-ready finish

See full steps in the Pool Plaster Disc Grit Guide.

Dry vs. Wet

We recommend dry use for most pool resurfacing projects because it’s simple and cost-effective. Any quality 7″ variable-speed polisher with GFCI or cordless works. Wet use can extend disc life, but requires specialized water-fed equipment. Pool Plaster Disc uses Matrix Abrasive bonding technology for controlled correction of pool plaster surfaces in both dry and wet polishing.

⚠️ Safety: Keep RPM ≤ 3,500. Avoid overheating. Always use GFCI protection and proper PPE.

Also available in 70 Grit and 120 Grit.